Sunday, 8 March 2015

Bolt Action Waffen SS vs Americans

Myself and Justjohn have decided to take part in a bolt action 1000pt league run by our local gaming store, The Gathering. I kicked off the league with a game against one of the local historical gamers, Simon. Most people seem to be taking part in the league to give people a better grounding in the rules, test out their shiny toys and to motivate everyone to paint up their models, rather than being a truly competitive league.

I play Waffen SS in bolt action, I love the warlord metal miniatures and have a good sized force. All I need is the extra little bits and pieces to round off my collection.

For this game I took
Leutnant w/SMG + veteran rifleman
2x 6 man squads with PF, 3x AR, 2x rifle and NCO w/SMG
8 man squad - 5x rifle Infantry, PF, 2x LMG, NCO w/SMG
8 man squad - 5x rifle infantry, 2xPF, 2x AR, NCO w/SMG
Veteran MMG
Regular mortar team w/spotter
Veteran sniper
Regular Puma armoured car
Regular Hanomag
10 order dice

I'm not sure on exactly what Simon had but roughly his force consisted of
1 1st Lt with 2 riflemen
12x regular infantry
12x veteran infantry
Medium mortar
Forward air observer
Armoured car
M36 tank destroyer
7 order dice

I was attacking and the objective was to get off the American table edge. 1VP for each of his units killed, 2VPs for every unit in his deployment zone at game end and 3VPs for every unit that leaves off his table edge. The US objective was to stop the German forces, 2VPs per kill.

Simon deployed all his units on the table with an infantry unit and vehicle on each side, support units in the middle and HQ on the left. I then set up my sniper and mortar observer for good LoS. The Hanomag with 2 6 man infantry squads onboard and the Puma both outflanked to the left.

Turn1 
The Germans forgot to wait for their preparatory bombardment and advanced on to the table into the waiting fire of the Americans (i pulled all my dice first) who began to quickly stick pin markers on the German infantry units before they had chance to react. The German sniper took out the US mortar and the M36 managed a lucky hit (3 6's in a row), taking out the German MMG team.

Turn 2
The Americans had the initiative early on (Simon pulled all 6 of his dice before any of my 9!), their air support came on to the table inflicting pins on the rifle/AR unit and sniper and the ground attack fighter mowed down 5 infantrymen caught in the open, despite them hitting the dirt (10 hits for Simon, halved for me being down. All 5 wounded the veterans!). The US infantry and armour opened fire while advancing, pinning both German infantry units down and reducing the recently strafed unit to just the NCO. The Germans in return managed to snipe a sergeant out of one of the US units but otherwise hit the dirt.

The US airstrike catches a unit in the open

Turn 3
The Americans, sensing they had the caught the Germans on the back foot advanced allowing the German mobile outflanking units to come in behind them on the left. Firstly the Puma closed to point blank with the American armoured car but failed to penetrate and then the Hanomag arrived, infantry clambering out the kill the US Lt and his accompanying riflemen. The US forces poured more fire into the German infantry, laying on pins but not killing many.

Turn 4
The 2 infantry units got back in their transport, while the rest of the Germans provided covering fire. The puma failed to penetrate again and sought cover behind woods after being targeted by the large M36. The veteran US infantry closed on the single surviving NCO, opening fire but failing to wound. The lone sergeant managed to pull himself together and rally while the German infantry unit on the left hunkered down after taking fire from the armoured car and the nearby US infantry took cover after the sniper killed the BAR carrier.

Turn 5
The Hanomag swiftly departed behind the US lines, too fast for the M36 to stop. Unfortunately the puma wasn't so lucky, getting stunned in the US deployment zone as it tried to retreat. The surviving NCO ran into cover to hide while the German and US infantry units on the left exchanged fire to little effect. The game ended there due to time constraints. 13-2 win for the SS forces, mainly due to getting 3 units of the table in the final turn, which gave 9VPs and the puma being in the US deployment zone. It was a lucky gamble hoping to get the first dice of the turn for the Hanomag but with 9-5 dice in my favour I had good odds and it paid off.

The M36 ambushes the retreating Puma

The NCO seeks cover from the veteran US troops

All in all a good first game for the league!







Sunday, 22 February 2015

To Dip or not Dip? Painting Dwarfs. Painting challenge 2015 Part II

With the equivalent of nearly 70 models painted in the last 6-8 weeks I've been flying through the dwarfs. That's more models than I've painted in 2-3 years! It also means I have my one large dwarf Hail Caesar division finished for our big 4 a side game later in the year

It's mainly thanks to using the Citadel painting station in the evenings. It means I can sit next to the wife and chat away, rather than me sitting painting in my nerd shed. Firstly it means I can get a small amount done every evening. Secondly, and more importantly, it doesn't leave my wife feeling neglected (and then annoyed) as I spend days on end in the shed, a win for both of us.

The other main contributor to my painting speed is Army Painter Quick Shade, namely the dark tone. This has enabled me to concentrate on only base coats for the majority of models, rather than spending a large amount of time washing and highlighting rank and file models. It's worked out very nice on the dwarfs and I've even gone back over a large number of models I painted years ago. These have been touched up where I neglected areas (all their weapon handles and boots were left black out of sheer laziness) and I've also gone back over nearly every shield to brighten them up. I've also painted two character models, but these were painted using the 'old fashioned' method of painting, washing and highlighting. 

Regarding the quickshade. I don't 'dip' the models but rather paint it on using an old brush. I then go back over the model about 5 minutes later and remove a lot of the dip where it has pooled in places I don't want it too. I find otherwise it can go on a bit thick, even with shaking off excess. It also means less waste and your tub lasts longer. I then leave the models a minimum of 48 hours before applying Army Painter Anti-Shine matt varnish.

I've learnt from experience that it has to be warm when you spray the matt varnish to prevent clouding, don't do it in cold conditions. I've a fan heater in the shed I turn on for 10 minutes before I spray models to warm it up a bit. I also do only one side at a time and then leave them for 5-10 minutes between coats, otherwise I sometimes find that the varnish wrinkles as it's applied. While you can sometimes repair the clouding by subsequent varnishing (I paint on GW ardcoat and then spray matt varnish again. This seems to remove most of the clouding. Thanks to JustJohn for the tip!) you can't repair the wrinkling so be careful and, unlike me sometimes, patient.

Here's some sample pictures of what I've finished in the last few weeks. I've still got to go back and base all the miniatures with GW Mourn Mountain Snow and Army Painter Tundra tufts.

These miniatures are dwarf troll slayers that I have painted and dipped. The hair did get an orange drybrush over the red basecoat though to make it stand out. Also the skin got minor highlights to prevent it looking flat due to the large amount of it!







These 4 dwarfs are ones I painted about 6 years ago and are much brighter than the dipped ones. 

The one on the left is an older miniature, while the one on the right is the one recently painted and dipped. The older ones will be getting a dip coat later today!


A selection of the dwarf rangers. I've ten finished in total and ten to do



Some of the dwarf warriors. There are currently 65 finished and 50 left to do






15 out of the 20 hammerers were painted years ago using the older painting method, but have since been touched up and dipped. 5 have been just base-coated and dipped. There's 20 Ironbreakers finished too that need varnishing.




The one on the left is base coated and dipped while the one on the right is base-coated, washed and highlighted (and now dipped!). Up close you can see the difference but when in units they look pretty much the same. The main difference is the face.


One of 2 dwarf organ guns finished along with their crews



The recently painted dwarf characters. These were painted, washed and highlighted. The lord on the bear did get an additional coat of dip for protection as he's a bit top heavy.







Only about 100 more dwarfs to go until finished!

Tuesday, 10 February 2015

warlord games ruined hamlet

In the previous post I briefly mentioned putting together bolt action scenery and posted some pictures up of the hamlet and church. 

These, along with the fantasy temple and tower, were ridiculously easy to paint. I picked up some grey car spray cans in dealz for €1.49 each, sprayed the buildings and dry brushed them a lighter colour. Then I painted quick shade dark tone over the entire thing, left them to dry for a few days and then sprayed them with a matt varnish. Simples!

All of the pieces were based on 1ft square MDF boards I had cut in B&Q. 8x4 boards are fairly cheap and they have a free cutting service in there. The bases were sanded, painted with generic brown house paint and then flocked. You can buy testers cheap enough in any paint supplier. This is a much more economical technique than painting large scenery pieces using GW paints as their guides would have you do.

Using this method of painting meant that I could get a large amount of scenery done fairly quickly and it looks decent on the table too. Much better than it sitting in boxes for years!

Monday, 9 February 2015

A Scenery bender

Last year I decided that all the things in my shed needed putting together. I figured if I don't have time to paint everything then the best thing to do was get it put together and on the table. At least that way I get to use it, painted or not. All my fantasy figures, hundreds of orcs, goblins and dwarfs got assembled, along with dozens of Space Marines and Tau. I also got stuck in to a load of scenery I had lying around the place. 

There was a temple and tower, both plaster kits I bought from ebay years ago (pictures to follow), along with a good few pieces of terrain for Bolt action (The Waffen SS are assembled but as yet unpainted!), the hovel set and a plastic church. I also built a modular 4ft x 4ft island for pulp alley, which also doubles as a huge hill for battles on a 6x4 table. This turned out ok. It looks nice but I forgot to take into account the bendiness of a stanley blade at full extension so there's some fairly visible lines that need hiding with scenery. Still... it fits together at least! Lastly there was the fort I started, using tips from the old generals compendium. This is still a work in progress though!

Here is a few pics of what I put together. I'm going to follow up at a later date with posts on how to build the island (and what not to do), and a step by step tutorial for the fort. I also purchased some fairly nice roads from Small Terrain on ebay, and at a little more than 11GBP for over 4ft of roads they are fairly cheap. I bought 2 packs to give our gaming groups all we would likely ever need.